Injection Lance

Remove the standard button spray nozzle from the aerosol by holding it between thumb and forefinger and gently pulling. Be sure to point the nozzle away from your face when doing this.

Hold a cloth or rag over the discharge nozzle of the lance. Locate the lance button into place over the aerosol valve. Gently push down. You should not need to apply enough force to actually discharge any material, but keeping the rag in place over the nozzle is a sensible precaution.

Insert the lance into the access point of the cavity then begin spraying. Gradually withdraw the lance from the access point. Be sure to stop spraying before removing the discharge nozzle from the access point.

Once the lance has been used it should be cleared of cavity wax before storage.