Touch-On

Vehicle must be cool and out of direct sunlight. Pre-wash with TOUCH-LESS cleaner to remove dirt or contamination on your paintwork. If further cleaning is required use AUTO-WASH concentrated shampoo and noodle wash mitt.

There are three methods that can be used to apply TOUCH-ON:

Pressure washer:
Add 30ml into washer or lance reservoir, top up to
300ml with clean cool water. Shake well and apply
under pressure to entire vehicle. Immediately rinse
using pressure washer. Dry vehicle with a
microfibre cloth or similar. Alternatively, an air
blower can be used.

Bucket:
Pour 30-60ml into a bucket then fill with 10 litres of
warm water (preferably from a fast running tap), mix
well. Apply using noodle wash mitt, sponge or
similar. Rinse with clean water. Dry with a
microfibre cloth or similar. Please note, this is not a
high foaming bucket wash.

Trigger spray:
Add 30ml to trigger bottle and top up to 1 litre with
(preferably demineralised/deionised) water. Shake
well. Trigger apply liberally, panel by panel, then
thoroughly rinse with pressure washer or hose. Dry
with microfibre towel or air blower.

Car must not be allowed to air dry as water spotting
may occur.